| ADVANTAGES OF THE HUWA BRANCH CLAMP |
|
- 100% stainless steel clamp, stainless steel 304/A2, no chance of rust!
- Standard high quality nitrile (NBR) rubber lining.
- The rubber lining is supplied with a waffle profile, forming a network of seals.
- Seamless rubber lining.
- High quality nitrile (NBR) rubber labyrinthshaped sealing ring arround the branch (see drawing III).
- Socket automatically TIG-welded in casing, which guarantees robustness and seal.
- Socket fitted with protective cap.
- Stainless steel, electrolytic zinc plated nuts, to prevent fretting.
- Strong and flexible comstruction, very lightweight.
- Simple to fit, no loose parts.
- Protruding parts rounded to prevent bodily injury.
- Clamp completely passivated
- Clamps separately packed in strong cardboard boxes, supplied with clear fitting instructions and dimensions.
|
APPLICATION OF THE HUWA BRANCH CLAMP |
|
| The HUWA stainless steel branch clamp is extremely well suited for making connections to taps, T-pieces, valves and fittings etc.) Drawing of house connection (see drawing 1). |
DIMENSIONS OF THE HUWA BRANCH CLAMP |
|
The HUWA stainless steel branch clamp can be supplied with various tapped branches. The standard internal screw threads are:
|
Range of branch clamp
|
|
|
HUWA 10 |
HUWA 20 |
| ½ " |
from |
48 mm |
88 mm |
| ¾ " |
from |
48 mm |
88 mm |
| 1 " |
from |
54 mm |
88 mm |
| 1¼ " |
from |
76 mm |
88 mm |
| 1½ " |
from |
82 mm |
88 mm |
| 2 " |
from |
87 mm |
100 mm |
Deviations from standard range of branch clamps are available on request.
The HUWA stainless steel branch clamp can also be supplied with external screw thread or a combination of internal and external screw threads. Other dimensions are available on request.
|
CHOICE OF THE HUWA BRANCH CLAMP AND THE DIMENSIONS |
|
A. Choice of diameter, see drawing 2
Huwa 10 branch - range 10 mm, Huwa 20 branch - range 20 mm, Huwa 30 branch - range 30 mm.
B. Choice of length.
Minimum pipe diameter.
For plastic, 50% extra clamp length is required. |
GENERAL |
|
- The HUWA stainless steel branch clamps are manufactured in house.
- Short delivery times, rush orders within 24 hrs.
- Also available in stainless steel 316/A4 quality.
- Also available in EPDM gasket.
- Pressure: water to a max. of 25 bar, gas to a max. of 12 bar. The permissible pressure depends on the medium and the diameter.
- Assembly: according the HUWA assembly instruction.
|
