| ADVANTAGES OF THE HUWA T-CLAMP AND THE HUWA TS CLAMP |
|
- 100% stainless steel clamp, stainless steel 304 (A2), no chance of rust!
- Standard high quality nitrile (NBR) rubber lining and sealing ring.
- Seamless rubber lining.
- Flanged branch TIG-welded in casing, both inside and outside, which gurantees robustness and seal.
- Flanged branch TIG-welded both on top and underneath.
- Flange fitted with protective cap.
- Stainless steel, electrolytic zinc plated nuts, to prevent fretting.
- Strong and flexible construction, very lightweight.
- Simple to fit, no loose parts.
- Protruding parts rounded to prevent bodily injury.
- T clamp completely passivated.
- T clamps separately packed in strong cardboard boxes, supplied with clear fitting instructions and dimensions.
|
APPLICATIONS OF THE HUWA T CLAMP AND THE HUWA TS CLAMP |
|
| The HUWA T and the HUWA TS clamps are extremely well suited for making flange connections under pressure. Drawing of flange connection (see drawing) |
DIMENSIONS OF THE HUWA FLANGED BRANCH |
|
| The HUWA T and the HUWA TS clamps are supplied with a standard flange according to DIN 2576. Flanges can be supplied with other dimensions, on request. |
CHOICE OF THE HUWA T CLAMP AND THE DIMENSIONS |
|
|
The standard HUWA T clamp is made of two parts and has a range of 20 mm. For larger diameters (from DN500), the standard HUWA T clamp is made of three parts and has a range of 30 mm. (Larger ranges and i.e. more parts are available on request.) The length of the clamp depends on the size of the flange and the pipe diameter, but is a minimum of 500 mm.
|
CHOICE OF THE HUWA TS CLAMP AND THE DIMENSIONS |
|
|
The HUWA TS clamp is always made of two parts and is made to measure. The HUWA TS clamp has no range. The HUWA TS clamp is extra heavy duty. The casing is made from 5 mm stainless steel; the fixing supports and bolts are also made of extra heavy materials.
|
GENERAL |
|
- The HUWA T and HUWA TS clamps are manufactured in house.
- Short delivery times, rush orders within 24 hrs.
- Also available in stainless steel 316 (A4) quality.
- Pressure: water to a max. of 25 bar, gas to a max. of 12 bar. The permissible pressure depends on the medium and the diameter.
- Standard PN 10 flange, other drilling specifications on request.
|
